|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#11
11-07-2008, 08:17 PM
|
|||
|
|||
|
Quote:
As said before, i have no problem moving the airbag around if i put the screwdriver further in, but when i pull it back and apply pressure straight in towards the center, the airbag is not moving at all.. And i have putquite a lot of pressure on it.. Hmmmmff....!!! 
|
| Sponsored Links | |
|
|
|
|
#12
11-07-2008, 08:32 PM
|
||||
|
||||
|
No prying, just pushing in... in a stabbing motion. Here's a cropping from the BMW repair instructions:
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is 
|
|
#13
11-12-2008, 08:03 AM
|
|||
|
|||
|
That was a good drawing..
I still coudnt get to it, but i guess its just me...  Anyways, i was just taking it off to paint the wood trim on it, so i just masked the area around and painted it on the wheel.. Did'nt turn out too bad... Thanks for the tip guys.. Last edited by ekvals; 11-16-2008 at 03:21 AM.
|
|
#14
06-06-2013, 10:29 AM
|
|||
|
|||
|
Quote:
any pics? I need to do my trim too that has worn down to a white plastic underneath but am a bit worried with all the masking etc it wont look good plus need to find a small spray can and the correct type of spray that wont make the finish even worse than now......they sell colour works brands acrylic sprays here that I used on my plastic mudgaurds on my scooter just fine, but no idea if will be ok with the trim on the steering wheel
|
|
#15
06-06-2013, 11:23 AM
|
|||
|
|||
|
If you don't get this part , its going to be more frustrating unplugging the connectors. Use a flatness screw driver and push inside the hole. Keep pushing and turning the screw driver till you feel tension. Airbag will pop out. Repeat on other side
|
|
#16
06-06-2013, 12:13 PM
|
||||
|
||||
|
http://www.xoutpost.com/bmw-sav-foru...ions-pics.html
Didn't see what wheel you have (it doen't matter for airbag release)but if you go to the above link there are pictures of the angle you need to use to hit the spring in the right place. When you find it you will feel it push back. Just push the spring in until that side of the airbag pops up. As posted when you have the air bag loose pull it out slowly so you can release the clips. They have locks that you pull up
__________________
 X5 4.6 2002 Black Sap, Black interior. 2013 X5M Melbourne Red, Bamboo interiorDallas
|
|
| Bookmarks |
|
|
|
|
Linear Mode
