|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
Thanks to others on the board....someone had posted a picture from realeom.com for parts for the X5 rear bumper trim panel.
After the 2004 facelift, I noticed that the 4.4i and the 4.8is has a "ring" around the outlet where the exhaust tips comes out in the rear trim. The rear bumper/trim is essentially unchanged from the 2000-2003 X5. Being that I have a 2001 X5, I thought I do a minor mod and update the rear exhaust outlets. There are two "heat protection" rights--left and right. See part #15 in this diagram in this link: http://www.realoem.com/bmw/showparts...51&fg=15&hl=26 HEAT PROTECTION LEFT 1 51127010123 $7.98 HEAT PROTECTION RIGHT 1 51127010124 $7.98 They are about $8 each and they just snap right in.... Make sure you get a "lefty" and a "righty" because they are NOT interchangeable. So anyone who has an older X5 with either an aftermarket exhaust like the Remus, Eisenmann, Dinan or and older 4.4i/4.6iS, you can add this to complete the trim (looks unfinished without the "heat protection rings").
__________________
|
| Bookmarks |
|
|
|
|