self leveling bypass

[nickid]

My self leveling has stopped working. i jumped the wires to the pump, and it worked for a second, then nothing. ive check the fuses and changed the relay, and still nothing.
The car is sitting ok as it is, and plan to put springs in, but how can i bypass the warning on the dash?

[electricalserv x5]

You can't You have to CLEAR THE CODES and it will come back to life................I went through this for 2 weeks with a bad mechanic here in NY..............
to bad your not here Pat has the software ..............fix mine in 20 minutes........

[nickid]

Would disconnecting the battery reset it?

[nickid]

no it didnt.
can i fit a resistor in somewhere? dont want to buy an expensive conversion module.

[Ricky Bobby]

You need to get the EHC coded out of the vehicle order and you will need SSS to do so if I recall correctly, you can't just bypass the module with a resistor to defeat the warning.

this I am assuming is what you'd want to do after converting to springs.

[nickid]

I suppose I just wanted a quick fix. I saw the bypass with resister on a 5 series, and hoped I could do the same.