Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Arnott
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #21  
Old 06-22-2009, 11:59 PM
Member
 
Join Date: Nov 2007
Location: West Palm Beach
Posts: 66
dville is on a distinguished road
I made some pretty good progress tonite:

Tight spaces when I am working at night with the garage door closed.


Borrowed a deep 36mm socket from a friend.


Got off the nut from the flange, then used a 3 jaw puller to get the flange off


Case is still together very tight, so I got out my favorite Harbor Freight tool, the gear puller set:


The rod threads fit perfectly into the threads in the case


Finally, after being ever so gentle with it, I heard a slight pop sound....




Some kind of device to prevent the chain from hitting the case/prevent falling off?


Transfer case details


Planetary gears transmission input


This is how loose the chain was




Needle bearings in the cover over the back of the front output shaft


Needle bearings in the cover for the trans/rear shaft


Chain was making contact with the pad


Took the planetary gears off




The spacer and needle bearings in the top left corner of this next pic came out while I slid the bigger gear off the shaft.




Had to remove the pad to get the chain off the smaller gear


Chain comparison:
New (lighter colored)chain is so tight it doesn't bend as much as the old (darker)one






Transmission input shaft taken out to put on new chain


New chain is so tight, the big gear is hard to go back in (without removing the smaller one)


Since I want to remove as little as possible, I 'help' it a little


In and nice and tight


Planetary back on.


Need some sealant like what was on there before, some grey stuff....this maybe?




DAMMMMmmmmm, the sealant is dried up, so close yet so far....anyway, I feel good about getting into the case and getting the chain on.
I was so anxious to get the case back together I started getting Krazy!!@#$


OK, just kidding....I will call it a night for now.

P.S.
I found out from RealOEM.com Online BMW Parts Catalog that I can buy the exhaust stud as a dealer part ($2.50 from PelicanParts.com), so I will use a socket and a C clamp to try and get the broken one out.

(They also have all the shaft seals for the transfer case, just in case...)

Last edited by dville; 06-26-2009 at 03:36 AM.
Reply With Quote

Sponsored Links

  #22  
Old 06-23-2009, 01:00 AM
Dannyell's Avatar
Member
 
Join Date: Dec 2007
Location: Hinckley OH: America de Nord
Posts: 1,347
Dannyell is on a distinguished road
Great work...I am replacing the transfer case myself on an ML 430
__________________
01 4.4


P5 card hacked
'our curr€ncy, your problem'
Bavarian Motor Wrong
:
Reply With Quote
  #23  
Old 06-24-2009, 04:17 PM
X_5 X_5 is offline
Member
 
Join Date: Apr 2009
Location: NY
Posts: 36
X_5 is on a distinguished road
Dville how many miles do you have on your X5?
Reply With Quote
  #24  
Old 06-25-2009, 09:42 AM
jst2878's Avatar
Member
 
Join Date: Jan 2006
Location: The BIG Apple
Posts: 3,218
jst2878 is on a distinguished road
what were the symptoms leading to your belief in changing the transfer belt
__________________
2001 X5 4.4i WHITE-Loaded like a baby's diaper SOLD
Reply With Quote
  #25  
Old 06-25-2009, 07:09 PM
Member
 
Join Date: Nov 2007
Location: West Palm Beach
Posts: 66
dville is on a distinguished road
Quote:
Originally Posted by X_5 View Post
Dville how many miles do you have on your X5?
111,000 miles. Former certified pre-owned.

Last edited by dville; 06-26-2009 at 02:56 PM.
Reply With Quote
  #26  
Old 06-25-2009, 07:17 PM
Member
 
Join Date: Nov 2007
Location: West Palm Beach
Posts: 66
dville is on a distinguished road
Quote:
Originally Posted by jst2878 View Post
what were the symptoms leading to your belief in changing the transfer belt
From a standing start, floor the pedal, and you would hear a cracking noise from drivetrain. Sounded like either driveshaft splines were slipping or similar. I verified the shaft was not slipping, so the only "slippable" part left was transfer case. When i found out a chain was inside, that seemed to be the culprit.
From a standing start, take off gently, and you won't notice any problem.

More weight in car, or uphill, it will happen easier.
Reply With Quote
  #27  
Old 06-26-2009, 03:46 AM
Member
 
Join Date: Nov 2007
Location: West Palm Beach
Posts: 66
dville is on a distinguished road
Got the right stuff...






I even followed the instructions on the sealer to squish out wet sealer, then wait one hour to tighten.


Hammered on the rear output flange


Gasket sealer looks like the factory grey stuff now.


Greased up the front splines


Trying to get the broken stud out


Tightening the output flange....with my $69 impact wrench


Moving the air conditioner condensate drain line from above the front driveshaft










Transfer case is installed back unto transmission, back to the broken stud...forget the clamp, a hammer and socket extension worked best.


Out, you cursed bolt...
Reply With Quote
  #28  
Old 06-26-2009, 09:52 AM
Icer006's Avatar
Member
 
Join Date: Jul 2008
Location: SoCal
Posts: 607
Icer006 is on a distinguished road
Nice. If you weren't taking pictures, I'm sure the job would have been a lot quicker.
__________________
--
08 Cayenne GTS
05 Cayenne Turbo
--
Reply With Quote
  #29  
Old 06-26-2009, 10:16 AM
X5Bill's Avatar
Member
 
Join Date: Jun 2009
Location: Platte City, Mo
Posts: 34
X5Bill is on a distinguished road
Dude you are my hero!
Excellent write up and pictures, I can't wait to see the finish!
Reply With Quote
  #30  
Old 06-26-2009, 10:19 AM
Icer006's Avatar
Member
 
Join Date: Jul 2008
Location: SoCal
Posts: 607
Icer006 is on a distinguished road
You don't "see" the finish. This isn't a bling "mod."
__________________
--
08 Cayenne GTS
05 Cayenne Turbo
--
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 02:17 PM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.