|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#7
|
||||
|
||||
|
Pushing axle back into knuckle without hammer
Just a couple of notes on my repair.
I did not have to use a hammer and block of wood to put the knuckle and axle back together. I just line the axle up straight (like driving straight ahead) and pushed the knuckle into the axle. The axle will give like a shock but will bottom out. I did not force anything, just kind of pushed the knuckle against the axle a few times (bottomed out like shock). I did spray some penetrating oil on the spline first. (Super Lube) I am guessing you could do the same thing if you somehow brace the axle with a clamp or something. That way you don't bottom out the axle. I also did not remove the strut bolts. I just pushed the knuckle aside (still attached to strut) when I worked on the axle and cv boot Thanks again for the write up. My camera would be full of grease if I tried to take pictures.
__________________
Luke 95 525ia 01 X5 4.4 1965 Pontiac Lemans Convertible (resto mod) |
| Bookmarks |
|
|
|
|