|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#241
|
|||
|
|||
Quote:
__________________
2004 4.8iS Check out the BMW CCA X Chapter on Facebook - https://www.facebook.com/groups/603822583674050/ |
Sponsored Links | |
|
#242
|
||||
|
||||
Maruzo, the headlight level adjustment will not work either so I would continue looking for the one amancuso and I got.
__________________
Digital Competition Systems The older I get... The faster I was... No Fear |
#243
|
||||
|
||||
Great to have come across this thread.
Thanks for all the hard work from everyone on this. I'll begin a search to locate my LCM. Also, I have asked the iBus app developer if they could add the coding option noted in this thread to activate the rear fog. Alternatively, I may employ the #3 pin to engage mine. I have the TCM module installed and the factory trailer harness installed in the rear connector so I can go with the #3 Pin option or the #10 + #12 Pin options. Mike
__________________
Mike Dallas, TX & Appleton, WI 2003 E53 4.4i Pearl Beige 2003 E46 330Xi Monaco Blue 2007 E90 335Xi Black Sapphire Metallic 2011 F25 X3 28i Black Sapphire Metallic |
#244
|
||||
|
||||
If you use pin #3 on the TCM there is no coding needed. Only if you use pins #10 and #12. Since pins #10 and #12 are occupied with wires from the main harness, you will need to tap into those where pin #3 is unoccupied and a simple wire with terminal can be placed in that spot. It just makes for a cleaner install without tapping or cutting wires.
You will of course have to run a wire from pin #3 or pins #10 and #12 of the TCM into tailgate lights and provide bulb holders as they are not there in US models so the code to turn those on in the IBus app really won't get it done in the end. There is also the small wire from the rear fog enabled LCM switch (pin #8) to the LCM itself (pin #45) that needs to be wired in to trigger the LCM to light the rear fog(s).
__________________
Digital Competition Systems The older I get... The faster I was... No Fear |
#245
|
||||
|
||||
Thanks for the clarifications Overboost!
Mike
__________________
Mike Dallas, TX & Appleton, WI 2003 E53 4.4i Pearl Beige 2003 E46 330Xi Monaco Blue 2007 E90 335Xi Black Sapphire Metallic 2011 F25 X3 28i Black Sapphire Metallic |
#246
|
|||
|
|||
Just saw you were doing this. Everything Overboost says is right.
__________________
2004 4.8iS Check out the BMW CCA X Chapter on Facebook - https://www.facebook.com/groups/603822583674050/ |
#247
|
||||
|
||||
Quote:
I'm waiting for my switch, connectors and bulb holders to arrive. Already have the LED bulbs. Just have to figure out how to pull the LCM panel without damage. Mike
__________________
Mike Dallas, TX & Appleton, WI 2003 E53 4.4i Pearl Beige 2003 E46 330Xi Monaco Blue 2007 E90 335Xi Black Sapphire Metallic 2011 F25 X3 28i Black Sapphire Metallic |
#248
|
||||
|
||||
Got my connector bits from Pelican the other day so I started the tailgate work for the rear fogs.
I had a pair of 26 watt 1156 bulbs (yeah I know spec is 21 watts) but after a few minutes of testing the outer lenses were getting warm so I resorted to my trusty LED specimens and similar brightness but sooooo much cooler and so much lower amp draw. Here's my path for the tailgate wiring with my trusty coat hangar fishing tool Awaiting my Euro switch from Latvia and then the cross cabin wiring to the LCM. Done! Thanks for the guidance folks! Mike
__________________
Mike Dallas, TX & Appleton, WI 2003 E53 4.4i Pearl Beige 2003 E46 330Xi Monaco Blue 2007 E90 335Xi Black Sapphire Metallic 2011 F25 X3 28i Black Sapphire Metallic Last edited by semcoinc; 02-16-2019 at 10:42 PM. |
#249
|
|||
|
|||
Please help i have a problem because in tcm plug pin i have a brake light but i have a yellow light on the dashboard
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|