I then estimated how much wire I needed to reach the TCM plus some and cut the 18 gauge wire off the spool. Here I felt it was appropriate to test the new rear fog lights, so I turned the car back on, hit the rear fog switch & placed the stripped end of the 18 gauge wire into the #3 pin spot & woohooo...it works!
Now feeling great that it all works, I routed the 18 gauge wire down to the TCM, cut it & attached the TCM connector to the wire:
Then I proceded to connect it into the #3 pin into the TCM slot:
I proceded to put everything back together & here it is...Rear Fog Lights Done:
__________________
04 X5 4.4i Dinan TB/BL, V1 Hardwired, Intravee II, MRTM Design E53 Pedals & Door Lock Studs
08 E90 M3, JrzB/BB, 360 Forged 8 Mesh, H&R Springs, RPI Scoops, Eisenmann Sport Exh, VRS Lip, CF Decklid, CF Diffuser, OSS LED AE, Rear Headrest V1, '09 iDrive Controller, Euro Rear Fog, OEM BlackLine TL, MRTM Design E90 Pedals & Door Lock Studs
05 E46 M3 Dinan S3-R S/C...FOR SALE
Last edited by mrtm2008; 11-12-2009 at 10:54 PM.
|
11-11-2009, 08:31 PM
Threaded Mode
