|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
I have 2 axis EHC2 air suspession. Several months ago "AUTOLEVEL SUSP INCAT" error appeared. I went to diagnostics - there was an error "Reservoir pressure remains the same at 11.6 Bar". They did all the tests and cleared the error. Everything was fine for another 6 months.
Now it again appeared with outside temperatearound 0C. The same error. Have connected BMW DIS - done all the tests - system not loosing pressure, cleared the error. Was happy for 2 days then again the same. Also noticed that the car going up and doing (while pressing suspession adjustment button) very slowly. First comes rear part and only in 30-60 sec front. There could be 4 options: - replace Air Compressor in the crank (now working a little bit louder, operating temperature 99C) - replace Air Reservoir - replace Air reservoir Valve Unit - replace ECU Has somebody got the same error and how it was fixed? Forgotten to mention that car behaves well on the road. Not lower or higher than usual. |
| Bookmarks |
|
|
|
|