|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#3
12-20-2009, 01:36 PM
|
||||
|
||||
|
Dealers only - If you're talking about the cable that connects up to the back of the MID to enable AUX. You can make your own if you're electrically inclined...Google for the instructions. You'll just need couple of capacitors, resistor, wires and the 3.5mm input jack. This site should have the AUX installation instruction to give you information on the pinout.
Any electronic stores - If you're talking about the 3.5mm/3.5mm stereo cable that connects to the AUX input jack. 
|
|
#4
12-20-2009, 02:37 PM
|
||||
|
||||
|
Not dealers only. Try ebay or doing a search using a Google or some other search engine. I've seen them anywhere from $20-$80 depending on the seller. There are also writeups on here as to how to make you own w/ about $5 worth of parts from an electronics store like Radio Shack.
__________________
 650hp 10 X5///M - Stage 2, Vibrant 1794's , gutted cats, custom intake, AC Forged 22's 325hp 98 BMW 740iL - ///M5 6spd, www.bavengine.com w/ Performance Option, electric fan, CF intake tube w/ heatshield, Mag 14816 w/ notched bumper, Bilstein/H&R Stage II/Powerflex 600+hp 02 Harley F150 - MHP900 Stage 3 engine, KB2.3, 8# lower, 60# inj, Walbro FP's 135hp 01 TL1000R - M4 full exhaust, K&N, Yosh box, -1/+2 gears, 2CT's
|
|
| Bookmarks |
|
|
|
|
Linear Mode
