Quote:
Originally Posted by Yugo
I'm at a loss. I've changed the filter/grommets and the pumps and it still leaks. I've also tried silicone and even plumbers putty but nothing seems to work. I don't think it is the tank. The pumps seem to fit loose in the grommets, could it be poor specifications? Anyone have additional ideas? Something so simple shouldn't be so frustrating!
|
Yes Yugo I know what is your problem, The hoses end that are going into the motor becomes dry with time and you will need to buy some fasteners and tight them together " The smallest fastener I found in LOWES was 1/4 inch and it worked OK. ", I had the same issue but my leak was coming from a very tiny hole in one of the motors too. Don't use silicone or putty, make it looks professional and even that those pumps fit lose but the leak is not from those grommets, that's is how it was designed. I hope that can help.
06-08-2013, 01:59 PM
Threaded Mode
