Air Filter

[bullethead]

Here goes sorry if it gets confusing but it really is easy and shouldn't take you more than 10 minutes..
Metal clips securing cover on airbox undo em along with the 2 to the maf unit.
press and pull on the hose to the secondary air intake.
By the maf unit there is a small diameter hose (black with a blue stripe) joined to a black woven braid hose disconnect it here its easiest.
Remove the cold air feed
Undo the 10mm bolt to the inner wing and it should all just pull up and out now.
Remove the hose from the secondary air pump.



It works fine without a heat shield as I have left the cold air intake attached but I am going to make 1 as it could do with some support and I've got some time on my hands at the mo.