Alpine CD Changer Wiring Plugs

bmikelson · #1 11-19-2005, 05:20 PM

Hey guys, I'm trying to install a Sirius radio on a 2001 X5 with nav & dsp.
A few problems I've run into:
-The three wire harness plugs came out of their harness. There is a red, brown, and yellow wire. Anyone out there know what order these go into the harness?
thanks guys!

Sponsored Links

UCrewX5 · #2 11-19-2005, 05:23 PM

Here's some wiring harness details - http://www.xoutpost.com/showarticle-128.html

bmikelson · #3 11-19-2005, 05:27 PM

thanks...now just need that for the cd changer!

UCrewX5 · #4 11-19-2005, 05:30 PM

Quote:

Originally Posted by bmikelson

thanks...now just need that for the cd changer!

With DSP you should have a coax cable (which provides the digital audio to the amp) and a 3 pin connector to the CD changer. The 3 pin connector has a 12V positive, ground, and the i-bus connection.

bmikelson · #5 11-19-2005, 05:34 PM

yes i accidentally pulled the wires out of that 3-pin connector so now unsure of correct placement (within the connector) of the 12v pos, ground, and i-bus wires.

UCrewX5 · #6 11-19-2005, 06:15 PM

If you are looking at the connector from the vehicle with the 3 silver pins showing (by this I mean the part of the connector where you would press the pin to release it from the connector), from left to right the wire colors are Black, Brown, White.

bmikelson · #7 11-19-2005, 06:42 PM

Hmm. I have different colors: red, yellow, and brown. thanks for trying though

Sponsored Links