Memory seat q

drpookiemd · #1 06-04-2010, 06:56 PM

Hey guys, search was done but no good direction. For some reason, every time I get in my X I have top press #1 on the seat to go back to where I want it. Is there any way to leave this setting as default so I dont have to press it everytime I drive?! Very perplexing!

Sponsored Links

diyanich · #2 06-04-2010, 09:00 PM

hi,put your key in the position 2,but don't crank put your seat the way you like it to be and press M and desired # ...it should stay there the next time you unlock.
good luck

drpookiemd · #3 06-04-2010, 09:13 PM

wow, it did the trick! no more hassle! thanks for taking the time to reply

diyanich · #4 06-05-2010, 08:39 AM

No problem

Quote:

Originally Posted by drpookiemd

wow, it did the trick! no more hassle! thanks for taking the time to reply

pdabbs911 · #5 12-15-2010, 07:56 PM

I tried this on mine and worked on just 1 click for the drivers door, but if I double click it to open the rear doors it goes back to a previous setting. Weird.

mywidebody02 · #6 12-15-2010, 08:53 PM

Might be in the car key memory. Might not be set for both keys.

pdabbs911 · #7 12-16-2010, 08:29 AM

Thanks for the Tip. I will check that out.

pdabbs911 · #8 12-16-2010, 09:22 PM

Hey mywidebody02,

My key works on all the other options ie... ignition, trunk, lock, unlock, except when I double click it to open the passenger doors. It is then that the driver seat will go to this full seatback and reclined position. If I unlock the trunk then open the drivers door(1 click), it will do it also. If I just unlock the drivers side and no other clicks, the seat will remain where I left it. Weird. I searched key programming, but those threads seem to be for keys that don't respond at all. I need to get this figured out or quit taking the children to school. They would love that. Thanks for the help.
PD

mywidebody02 · #9 12-16-2010, 09:56 PM

U need the GT1 to check this but this is what it is. default for this is not active.

Seat Settings
(Mirror memory is available on E46
vehicles since 09/99 production)when unlocking
when opening a door
not active
The automatic seat adjustment is activated by the specific key being used if the vehicle is
equipped with seat memory. Setting in Car Memory defines when the actual adjustment
starts: when pressing unlock button on remote, or when opening the door.3,5,7,x5

mywidebody02 · #10 12-16-2010, 10:01 PM

see if you can access this link.

http://www.xoutpost.com/articles/x5/...formation.html

Sponsored Links