|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#11
|
|||
|
|||
|
My guess is a pulley of some sort or the alternator. The bearings in the alternator can go bad without affected its charging ability so that'd be the first place i'd look. |
| Sponsored Links | |
|
|
|
|
#12
|
|||
|
|||
|
OK. Thanks.
My next question is; how do you check the bearings in the alternator without replacing the alternator? |
|
#13
|
|||
|
|||
|
get a long screw driver and put the tip on the casing of the alternator. Put you ear against the other end of the screw driver and listen for any odd sounds. Otherwise if you have a second person get them to put their ear near the alternator as you rev the engine.
|
|
#14
|
||||
|
||||
|
And oddly enough the long screwdriver method gives more clear sound then the mechanics stethoscopes available in stores... You can use that to check all the belt driven components you can get to Just be careful you don't slip the screwdriver into the running belt, for obvious reasons.
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is
|
|
#15
|
||||
|
||||
|
Am i wrong in thinking then that the torque converter and some of the gearbox are still spinning even when in N.
|
|
#16
|
||||
|
||||
|
You are right in that it is still spinning, but there is no load on it so it is free spinning. If the noise is exactly the same in neutral it isn't likely the TC.
A quick way to confirm if it is a belt driven component is just to remove the belt and start it and see if the noise went away. Just don't run it for too long with the belt off obviously.
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is
|
|
#17
|
||||
|
||||
|
Quote:
I agree about removing the belt to help find the noise. But can't agree on the TC not making noise when in N. When my TC went it made noise in gear, N, and P when the engine was revved. Had tranny rebuilt and and noise was all gone. Unfortunately my X is back in the tranny shop for the same noise/ issue after only 7 months. The rebuild is under warranty and just waiting to hear back from the shop.
__________________
2002 X5 4.6 Sold Dinan CAI, TB, Mass Air, Stage 4 engine & tranny software, X-pipe 2004 745Li 1997 Ford Mustang Cobra Vert 1985 Mazda RX-7 13B-REW single turbo 60-1, Haltech, Meth injection, MSD Ignition, and much more 2008 Mazda Speed3 Hypertech Tune ![]() ![]()
|
|
#18
|
||||
|
||||
|
Wow, the new TC only lasted 7 months? Hopefully they used an OEM 4.6is TC at least...
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is
|
|
#19
|
|||
|
|||
|
Quote:
Were you hearing the same thing as I described? It sounds like a turbo booster or a tractor engine winding up but not necessarily loud, just annoying. It is associated with the engine RPM but once I get it up to speed and drive without the acceleration then the noise goes away until I step on the throttle again. |
|
#20
|
||||
|
||||
|
To my understanding they did and it delayed the rebuild by a few days as my original TC was not rebuildable. They sourced a used TC and rebuilt it. I will be paying much more attention to the details of exactly they are fixing/ rebuilding this go around.
__________________
2002 X5 4.6 Sold Dinan CAI, TB, Mass Air, Stage 4 engine & tranny software, X-pipe 2004 745Li 1997 Ford Mustang Cobra Vert 1985 Mazda RX-7 13B-REW single turbo 60-1, Haltech, Meth injection, MSD Ignition, and much more 2008 Mazda Speed3 Hypertech Tune ![]() ![]()
|
![]() |
| Bookmarks |
|
|
|
|