|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Wallyx5,
Do you need any specialty tools to remove the dashboard and where can you get this insert specialty tools. I get the instruction and get ready to do the blower motor. Thanks, henry |
|
#2
|
||||
|
||||
|
No special tools that I can remember. I used the little plactic pry bars here there. But the only thing I remember I needed was patiences and don't try to skips steps you everything has a order to come apart. Also be careful when doing the airbag area there are a couple of connector cables you have to disconnect and you do not want to break them or you will have to replace the cable. It's really not that difficult of a job.
__________________
_________________________________________________ 2010 X5M /// R63 AMG...Wifey's 540HP Family Hualer 2001 X5 3.0i Sport 335,448 miles & counting... SMG M3 Steering wheel E46 Stainless Racing Headers 4.6is Exhaust Turner Pulleys Afe Intake Brembo drilled rotors PowerFlex Bushings Hualingan 30mm H&R Spacers rear 20mm H&R Spacers front Bavarian Autosport High-Performance Coils Active Autowerke's Performance Software |
|
#3
|
||||
|
||||
|
OMFG all this for a blower motor?
|
![]() |
| Bookmarks |
|
|
|
|