Install Hualingan on e39/e53 DIY

[fullmetaljacket]

Originally Posted by wallyx5

Ok Guys I am finished. Almost.... I got my blower motor replaced and needless to say what a job. I still have some tweaking to my Hualingan unit but the placement is excellent. Here's some more pics

Now that's what I'm talkin about! I like the HL deeper in that hole. You got it Wallly. Niceee!

Great picture of the naked dashboard. Geeez! Will you be able to put things back together?!?!

I am able to derive much knowledge from this. I hope you can post some more 'naked dashboard' pix (in different angles) so that we know where to run cables and stuffs. Very useful for mods involving running stuffs under the dash and all. Thanks!

[romeokc10]

Originally Posted by fullmetaljacket

Now that's what I'm talkin about! I like the HL deeper in that hole. You got it Wallly. Niceee!

Great picture of the naked dashboard. Geeez! Will you be able to put things back together?!?!

I am able to derive much knowledge from this. I hope you can post some more 'naked dashboard' pix (in different angles) so that we know where to run cables and stuffs. Very useful for mods involving running stuffs under the dash and all. Thanks!

Hey fullmetaljacket, this looks so much better than the Dynavin, right? LOL!

[fullmetaljacket]

Originally Posted by romeokc10

Hey fullmetaljacket, this looks so much better than the Dynavin, right? LOL!

[wallyx5]

Originally Posted by fullmetaljacket

Now that's what I'm talkin about! I like the HL deeper in that hole. You got it Wallly. Niceee!

Great picture of the naked dashboard. Geeez! Will you be able to put things back together?!?!

I am able to derive much knowledge from this. I hope you can post some more 'naked dashboard' pix (in different angles) so that we know where to run cables and stuffs. Very useful for mods involving running stuffs under the dash and all. Thanks!

At first it didn't want to sit all the way back in the molding. I kept moving and what i found was the wires in the back I think were holding it up from dropping into place. So what I did was remove the heating cluster directly underneath the radio spot and from there I was able to get my hands under neath to move things around and slide it all the way in.

And the pictures you see are after I put everything back together. Its not that difficult to remove everything it's just slow. But I have Heat & Air conditioning. Yeah!