Install Hualingan on e39/e53 DIY

[fmugur]

Originally Posted by Shurap1

Hi,

I have a problem after installing the rear view camera. When I put the car in reverse, I need to change the source manually to TV to see the reversing video. Also sometimes the screen says NO Signal, sometimes it works. Also the camera is not capturing good image, I can see frames scrolling continuously and flickering on the screen. My car is 2003 BMW X5.

Can anyone please let me know how to automatically shift to reverse video when the car is in Reverse gear? Also why it keeps loosing the signal? I have two RCA cables running from HL to camera (one was for backup), both have same issues, so cable is not a problem here. I tried changing camera as well but same result. So thinking if it is something with main HL unit itself or what. And any solution for the slow frame rate please?

My camera is also purchased from HL: BMW series-Bmw Car dvd player,Mercedes-Benz navigation,Suzuki dvd,Audi Navigation System,Subaru car audio

I have mounted the camera on one of the license plate bulb and and more serious problem is odometer dash shows a message to check the license plate light.

When reading in this thread: http://www.xoutpost.com/bmw-sav-foru...amera-e53.html, post: http://www.xoutpost.com/317974-post5.html the guy is talking about the resistor to the cameras power supply. Do anyone know what is that register and how it will help me to get rid of the dash error message?

Thanks,
Shurap1

I had no time to put the backup camera DIY up on this post. I will eventually do it. So, I can answer some questions.
I think you connected to the wrong input. Hualingan comes with video input and the backup camera input (labeled Back). Connect it to the wire labeled "Back" and it should work.
The error message is probably expected since the new light is LED. I guess you need to cancel that with a resistor.