Floor Mats

[z168]

Originally Posted by thinkinn

Left and Right Hand is the same??
I live in UK.

oh, right duh. Sorry about that

Originally Posted by Turbo_Bimmer

The metal anchors were stock equipment with the velour carpets. I tried to find them in realoem.com but had no luck.

thanks for checking

Originally Posted by phil47

You have the same mats as me. There should be a flat, round area about 2" in diameter right around the holes on the underside of the mats. That's where the round Velcro section can be attached to.

I'll check it out later...

[ECS Tuning]

Originally Posted by thinkinn

Cant find like this in UK.
I'd like buy set of beige, is any1 where to buy?
thx

Originally Posted by z168

heres the Front

and the Rear

check out how much postage would be to your city

as long as the vehicle is Left hand drive.

Originally Posted by thinkinn

Left and Right Hand is the same??
I live in UK.

The mats come in right left pairs. If your car is Right Hand drive send me a PM and I'll see what we can do about finding the right mats for your X5.

ECS Tuning

[z168]

Originally Posted by ECS Tuning

I see what you mean now by 90° lock. I'll put one of my parts guys on digging and seeing if he can find some different type ones. In the mean time I'd toss some carpet tape on the back of them, it's cheap and holding down several of the guys in the offices floor mats.

ECS Tuning

Got any updates on this?

[ECS Tuning]

Originally Posted by z168

Got any updates on this?

We found a few other types even brought tons of them in looking for the type that would work but none of them looked promising. What we've found is several company's make the mattes for BMW not all the anchor systems are available separate, I think this is the case with the system you're looking for. My suggestion goes back to the carpet tape idea once again, it's what I've had to do in my car as well since we couldn't source the anchors for it either.

ECS Tuning

[SlickGT1]

These are the ones I got from ECST. They come with the correct hooks that fit the factory mat positions. Too bad it doesn't show the hooks in the Pic, but maybe ECST can open one up and show us the hooks. Actually I might open mine up and snap a pic. I'll try to remember tonight.

http://www.ecstuning.com/Search/82550151189/ES196748/

[z168]

Originally Posted by ECS Tuning

We found a few other types even brought tons of them in looking for the type that would work but none of them looked promising. What we've found is several company's make the mattes for BMW not all the anchor systems are available separate, I think this is the case with the system you're looking for. My suggestion goes back to the carpet tape idea once again, it's what I've had to do in my car as well since we couldn't source the anchors for it either.

ECS Tuning

Thanks for checking. Do you know where i can get the velcro and type?

[z168]

Originally Posted by SlickGT1

These are the ones I got from ECST. They come with the correct hooks that fit the factory mat positions. Too bad it doesn't show the hooks in the Pic, but maybe ECST can open one up and show us the hooks. Actually I might open mine up and snap a pic. I'll try to remember tonight.

Home Page > Search > 82550151189 > ES#196748 Rubber Floor Mats - Front - 82550151189

Thats exactly what I have. But the twist lock hooks that came with it doesnt work for my '00 X5

[ECS Tuning]

Originally Posted by z168

Thanks for checking. Do you know where i can get the velcro and type?

At most hardware stores you can find velcro just make sure to ask if it the one that is deigned for use around high temperatures. If you go the carpet tape method (that's what I did) I grabbed the cheapest one they had in stock at the hardware store and put a few long strips of it on my mats, works great no issues with sliding or movement.

[svtlmr]

Originally Posted by z168

Thanks for the post but I didnt like what i have seen from weathertech (another brand vehicle) as it looks plasticky rather than rubbery. Or has it changed since?

Just FYI i recently purchased floor liners from weathertech and i must say....I am not happy with them.They are a good fit BUT they are made from some kind of plastic type material that make them to arch back.My passenger side is already arched.When i called Weathertech they told me to put a phone book on top of the liner and let it sit overnight....not the solution i was looking for...On top of that i ordered a tan color but what i got was more brown than a tan...
Well i just wanted to share my experience with the product

[SlickGT1]

Originally Posted by svtlmr

Just FYI i recently purchased floor liners from weathertech and i must say....I am not happy with them.They are a good fit BUT they are made from some kind of plastic type material that make them to arch back.My passenger side is already arched.When i called Weathertech they told me to put a phone book on top of the liner and let it sit overnight....not the solution i was looking for...On top of that i ordered a tan color but what i got was more brown than a tan...
Well i just wanted to share my experience with the product

You should have ordered from ECST. Perfect fit and finish. LOL

Ecst should be paying me for this.