|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Led tail light errors
__________________
2005 Black x5 3.0i |
Sponsored Links | |
|
#2
|
||||
|
||||
LED do not normally draw enough to fool the computer. When you hit the brakes you do draw enough. You most likely need a resistor (or a bulb) in a parallel circuit to the bulbs on each side to fool the computer.
__________________
Sent via Telegraph Wires using my Morse Key. 2015 X5 xDrive35i MSport 2013 X5 xDrive35i |
#3
|
||||
|
||||
i see, so i guess this is normal to see this and to fix this i would have to create a slightly greater draw of energy in order for the computer to say that the lamps are ok. Anyone took the time to do that?
__________________
2005 Black x5 3.0i |
#4
|
||||
|
||||
LED's do not "show' the right signature to the computer until the brake lights actually come on so a bulb/resistor will fool the computer. Resistor kits are out there at most of the LED bulb suppliers. Little pricey but a bulb mounted and wired correctly will do the job for a lot less.
__________________
Sent via Telegraph Wires using my Morse Key. 2015 X5 xDrive35i MSport 2013 X5 xDrive35i |
#5
|
|||
|
|||
LightWerkz Capacitor Fix for LED Tail Lamps
Needed: 1. Set of pliers 2. 5 minutes of your time 1. Use provided red wire tap-in connectors; clamp one on the green wire, and the other on either of the two black wires. This is on the aftermarket wiring side, not on the OEM wiring. We do not want to modify that! 2. Plug in the red side of the capacitor to the green wire, and then the black side of the capacitor to the black wire. 3. Zip tie the capacitor neatly to the rest of the wiring. 4. Go enjoy your new Led tails! Got questions? Call – 973-767-2014 Email – [email protected]? Thanks!
__________________
2006 4.4i |
#6
|
||||
|
||||
Thanks for the responce Lightwerkz! Great Customer service. Emailed about me losing the clamps and the guy sends it the next day at 9 am right away to me so i would be able to finish my LED tail lights. I believe the Green to Red wire and Black to black has solved the issue with the Error! i might of been blinding ppl with my tail lights apparently it was REALLY REALLY bright even without brake pressure and lit up another row of lights when i would apply brake lights. Hurts my eyes just looking at it previously lol.
__________________
2005 Black x5 3.0i |
#7
|
||||
|
||||
Lets see some pics of said taillights.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|