LED angel eyes bulb, anyone tried this one?

[sockethead]

Originally Posted by TerminatorX5

Rob,

check post #7 in this thread http://www.xoutpost.com/bmw-sav-foru...cs-expert.html - there are two files, one is original as it came from the factory, and the other one has the cold monitoring turned off for the AE. (also has the corner lights off, gong off...)
If you find the BMW Coding tool software, you might be able to compare two files and then it spits out the differences, so you don't have to go line by line to fine them...

Thanks!

[SlickGT1]

Originally Posted by TerminatorX5

Rob,

check post #7 in this thread http://www.xoutpost.com/bmw-sav-foru...cs-expert.html - there are two files, one is original as it came from the factory, and the other one has the cold monitoring turned off for the AE. (also has the corner lights off, gong off...)
If you find the BMW Coding tool software, you might be able to compare two files and then it spits out the differences, so you don't have to go line by line to fine them...

And the person that gets all the credit for discovering the cold monitoring issue. Everyone who upgrades the AEs needs to follow what Terms said.

[TerminatorX5]

Спасибо, Денис, весьма польщён...

[joemorelli99]

Bnagy...looks like the CREE 10W 7000k is as good as it gets without a major Angel Eye overhaul. Very nice

[Bnagy4.8]

Just to follow up on the CREE, one crapped out on me after like 3 months but I replaced them with some 25w Cree bulbs any it looks about the same , couldn't be happier. When going for any LED upgrade CREE is where it is at. Crisp & clean! I bought mine off eBay and other than small imperfections to the harnesses I love the look.