Quote:
Originally Posted by mrbmwx5
You will the LCM2 to able to turn on the AEs as DRL.
|
Yeah. I know it will be in LCM. I've been scouring the lines in t. module all day. It's just a matter of finding the code or programming the feature. It is possible. They turn on with low beams as drl active and also as parking lights. So... I've been looking at the code for cold monitoring of the AEs hoping it will lead to something.
Update- Some things i've noticed when playing with DRLs parameters that may or may not already be known (I'm sure they are). Turned on my DRL's and used the low-beam for them. I noticed that this either appears to bypass the auto light selection on the light switch or something else because the green LED is illuminated, stating that it's active. Only way of disabling this is to use the extremely ugly US version of the DRLs (not going to happen). Any ideas?
On another note - what is the difference between standing lights / front turn signals / and side markers because there doesn't seem to be any as far as NCS is concerned. I figured the side markers would be the signal lights on the 1/4 panels which is not the case. I am getting so confused. I did manage to get the front signals to not function as parking lights though, which looks so nice since the AEs are the only thing lit when the switch is set to parking lights.
Anyway, back to Google Translate.
07-18-2013, 07:33 PM
Threaded Mode
