|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
PLEASE HELP! got a cluster..
installed it but have problems i drove it around for about 40KM and nothing happend heres what happens: 1.no clock or date... i press the button on the deck to set it and it just does nothing 2.abs, yellow (!), and DSC light stay on 3.temp gauge is 3/4 hot. 4. no PRND, S, 54321 light up so i got worried plugged the stock one back in and everything went back to normal EXCEPT problem #2, and that went away after 10 min of the car on. What do i do? guys that have done this did you run into this too? |
Sponsored Links | |
|
#2
|
||||
|
||||
Not really sure, but I CAN say, make sure all your pins look good, on the male and female side, and make sure you have good contact... Dont know why it wouldnt work...
__________________
Been there...Done that |
#3
|
|||
|
|||
they are all good...
this sucks haha |
#4
|
||||
|
||||
I'm not sure if you need to have your M5 clusted re-coded at the dealer.
__________________
TQ2K '04 N62 - Alpine White/Truffle '03 S62 - Petrol Mica/Champagne '97 S52/4/5 - Alpine White/Dove '91 M42/4/5 - Brilliantrot/Tan |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|