|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Cranks good and engine start for 2sec on first start then only cranks
New ignition switch 4,4 v8 So today when i try to start the car it started on first attempt and dies after 2sec. No missfireing seems to run smooth and then just dies. Second attempt same. Third attemt i gave some gas and runed up to 3000rpm then dies. Tried couple of hour later Starts and dies after 2 sec. Second time only cranking. So what to start with? Try some start gas and see if its fuel related? Check sparkplugs for spark? After some reading here im guesing: Fuelpumprelay? Relay for DME? Crank shaft sensor, or is this only in use after start up? OR I had the cheak engine light on the other day and had the codes cheaked out: it was the preheating for the o2 sensor(lambdasond) The indy errased it and the light whent away. Please any ideas |
| Sponsored Links | |
|
|
|
|
#2
|
|||
|
|||
|
So hooked it up and did a ODB2 scan with key in position 2. Same code as before about the o2 sensor but nothing else.
I didnt get the vin number? When I monitored the "live data" of the sensors with key in position 2 i get 0.0 on them and i get air intake temp to show. When i was trying to start the car i get error on all off the sensor? So please any ideas? If any body knowes does a problem on the I-bus interfer with OBD2 scans? |
![]() |
| Bookmarks |
|
|
|
|