|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#11
08-20-2013, 08:53 AM
|
||||
|
||||
|
remove the torx screws and check for 2 12v+ and if they are there then your light holder is corroded, I changed mine and left the LED bulbs out and I have had no problems
__________________
04 black on sapphire 4.8is personally put 90,000kms fully loaded minus the fold out trunk floor -20' DUB X10 3 piece rims staggered setup -LED angel eyes + interior lights + e70 style shifter -AFE stage 2 intake system -x-pipe/resonator delete -UV coat windshield -rebuilt Pano roof -dynavin N6 -all front and rear end suspension parts and both front cv shafts replaced -OEM hitch  And 2007 GSXR750 
|
| Sponsored Links | |
|
|
|
|
#12
08-20-2013, 08:53 AM
|
||||
|
||||
|
swap the lights left to right right to left,
remove the torx screws and check for 2 12v+ and if they are there then your light holder is corroded, I changed mine and left the LED bulbs out and I have had no problems
__________________
04 black on sapphire 4.8is personally put 90,000kms fully loaded minus the fold out trunk floor -20' DUB X10 3 piece rims staggered setup -LED angel eyes + interior lights + e70 style shifter -AFE stage 2 intake system -x-pipe/resonator delete -UV coat windshield -rebuilt Pano roof -dynavin N6 -all front and rear end suspension parts and both front cv shafts replaced -OEM hitch And 2007 GSXR750
|
|
#13
08-20-2013, 09:09 AM
|
||||
|
||||
|
right lic plate light also is fed to the trailer harness - so, if you "messed" with the trailer harness you may have had tampered with the right light... Do you have access to WDS wiring diagrams?
|
|
#14
08-20-2013, 10:17 AM
|
||||
|
||||
|
Quote:
a friend of mine who owns a body shop did the Hamann install and all the body work, removed the hitch and tied up the wiring so my thought is the same as yours in that it may be related, even though it did work fine for 3 months after the install was completed. Biggest issue is how to diagnose this problem? Gurjit i know you said yours was water/corrosion related….. did you leave the LED plate lights out? If so how come if the issue was resolved? Just curious if you feel the LEDs would present an issue
|
|
#15
08-20-2013, 11:40 AM
|
||||
|
||||
|
wait a sec, Riggi - you got an E70? it is in your avatar, right?
i do not know how the lic plate is wired for the E70 - i thought you have an E53... the WDS requires Java plug in and also SVG Adobe reader plug in for the scalable diagrams - i can't install anything on my work computers, so i don't have access to WDS but you might be able to read it... There is a chance that the principle was carried over from E53 to E70 but I am not sure...
|
|
| Bookmarks |
|
|
|
|
Linear Mode
