Wrapping Cracked Trim

[bcredliner]

Helihover I like the way the CF eliminated the third color on the dash and tied to the door handle, looks good!

[Ricky Bobby]

Looking great! I am keeping the wood temporarily but someday will swap to Titan 2 trims. I'm with BC, the tri tone on the interior when wood is present doesn't do it for me

[giodog2000]

Originally Posted by bcredliner

Giodog2000, looks great!

Thx

[Helihover]

Ok so I downloaded the PB app. All is done except for the steering which I believe requires different tools than I have. The center was quite challenging to wrap and I made two mistakes, but they are not noticeable. The shifter knob I did twice, but looks perfect!

[Helihover]

Thanks guys for all the complements!

[bcredliner]

The upper and lower steering wheel pieces are easy to remove. If I remember correctly all you will need a phillips screwdriver, a regular screwdriver and perhaps a torx bit and the instructions for removing the air bag. Easy and short process.

[giodog2000]

Good job, looks good

[Helihover]

Originally Posted by bcredliner

The upper and lower steering wheel pieces are easy to remove. If I remember correctly all you will need a phillips screwdriver, a regular screwdriver and perhaps a torx bit and the instructions for removing the air bag. Easy and short process.

I've read two different ways of removing and I think I need a long t15 driver or 20. Anyway, I was able to remove two screws on the lower portion and that was about it. Any help on how to remove the steering wheel trim would be greatly appreciated.

[giodog2000]

Isn't it a T10?

[Ricky Bobby]

For the steering wheel trim you will need to remove the airbag.

Nice job on the console!