|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
01-12-2014, 02:16 PM
|
||||
|
||||
|
M54 Jet Pump broken
I was working on replacing the intake boot on my M54 today, and while moving the jet pump out of the way to install the new boot, the pump broke...
 I'm thinking that the part failed because of age and the current extreme cold we've seen in SC. Anyway, has anyone ever had this happen? I was able to get the hose off of the top (labelled 1 in the photo), and I see one of those damned crimp hose clamps on the bottom (2 in the photo). I assume I'll be cutting the crimp clamp off the lower hose and replacing with a normal hose clamp. Does anyone know where the hose connected to 2 goes? I'd like to know in case I have to replace it. I can't really tell from the realoem diagrams. 
__________________
 2003 E53 3.0i DOB 10/15/2002 Sienna red, Savannah Beige Dakota leather Type FA53, Engine M54B30 2018 G02 30i DOB 4/21/18 Black Sapphire Metallic / Canberra Beige Vermasca leather Engine B46O 
|
| Bookmarks |
|
|
|
|
Threaded Mode
