Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 04-08-2014, 12:56 AM
Acidphase's Avatar
Member
 
Join Date: Mar 2014
Location: New Jersey
Posts: 74
Acidphase is on a distinguished road
Well if the axle or CV joint is grinding and the boot is just torn as you know they sell the boot kits. However I think your problem was really the process and not the parts. In the last case the axle/joint could have been going depending how long the boot was ripped open exposed to the elements like water, sand, and round grime so it could have been on it's way out anyway.
Did your local mechanic give an explanation why he just replaced the whole axle other than "might as well". He could have just been trying to make a few extra bucks which is a complete assumption on my part he could be the most honest guy in the world lol
I've had other imports in the past and the boots have ripped a good rule of thumb on them was if you catch earlier you can save some money with a cv boot kit for like $50 vs buying a whole new axle.
On our BMW's the axles are more expensive than other cars where as the whole axle can cost as low as 100 bucks lol So it's normally just worth it to replace the whole thing vs buying a 50 dollar kit being you have the whole thing apart already.
With all that bullshit said if your axle is clicking or making any noise whether it be on turns or not the axle is already done anyway and just doing a boot kit would be pointless.

I think your hang up is "Do I want to waste money buying a CV Boot Kit again just to end up bringing to my local mechanic in the end?"
Hence wasting money on the kit in a effort of futility. So sounds like your doubt lies in the ability to DIY being burnt once already.
For you it comes down to this.
1.) Does the axle need replacing? If no see (2.) If yes see (3.)
2.) Can I trust myself with second attempt on a boot kit?
3.) Do I let my mechanic replace the axle for me again?

Oh you might be able to get a boot kit cheaper other than the dealer just depends on the part store. I'm in a good unique position though my friend runs a local parts warehouse where the dealers get their parts so I get some good deals. Even though most warehouse parts places sell to the general public and are cheaper anyway as they just deal strictly with parts (no tools or other crap just OE/Aftermarket parts).
I would just see if there is a specific OE brand you need and ask if they can get it if this is your concern.
Hope this helps your position
__________________

2006 X5 4.4i
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 10:07 AM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.