Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
sway bar diy sway bar diy
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-23-2014, 08:54 PM
Member
  
Join Date: May 2005
Location: New York
Posts: 150
ValveTronic is on a distinguished road
sway bar diy
I picked up a set of lemforder sway bar links for my 03 4.6i. I found installing the links problematic as my "thin" 18mm box wrench were not thin enough. As I tightened the nut down the 1/8 of inch thin 18mm wrench became stuck.

Any recomendations on a truly thin 18mm box wrench? Need something thinner than an 1/8 of an inch.

Thanks in advance!
__________________
2012 X5 50i & 2003 X5 4.6
Reply With Quote
 

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Xoutpost - Sponsors - Archive - Top

All times are GMT -4. The time now is 11:08 AM.
vBulletin, Copyright 2025, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.