i broke down today and look what i found

[1iwilly]

well put it back together after it cool down she is back up and running i try to put that on the end of the mass then try to put hose back on it won't fit so i left it out for now and tighten clap supper tight.thanks to all that reply

Originally Posted by upallnight

That's the rubber ring between the MAF and the throttle body. Undo the clamp and I bet you are missing the rubber ring.

Not the first person to have that thing come off and jam in the throttle body. Last person to mess with the MAF didn't put it back on correctly.

[upallnight]

A little trick, put a little dishwashing liquid on the rubber ring and it will slip right in. KY jelly will also work but that a little pricey.

[TwinTurboGTR]

Aye. Well I am glad you got it sorted out. Incase you get that error again, it means the computer is not recognizing the status of the TB. To reset the system and reinitialize, you can turn the key to the ON position and wait 30 secs. You should hear the TB clicking. This is the computer doing a test to see where the butterfly plate is. Then shut it off. Repeat again then shut off, then start. That procedure resets the TB adaptations.

[1iwilly]

thanks that's the info i went by

Originally Posted by TwinTurboGTR

Aye. Well I am glad you got it sorted out. Incase you get that error again, it means the computer is not recognizing the status of the TB. To reset the system and reinitialize, you can turn the key to the ON position and wait 30 secs. You should hear the TB clicking. This is the computer doing a test to see where the butterfly plate is. Then shut it off. Repeat again then shut off, then start. That procedure resets the TB adaptations.