You can unplug the cable to the transfer case (X will be in rear wheel drive only with cable disconnected) to rule out problem with transfer case. But your symptom sounds more like transmission issue.
Quote:
Originally Posted by Gurjit
headed out to work today
got about 3 kms from home
tranny started acting weird, like it didn't know what gear to be in
got it towed home on a flat deck
hooked up inpa, reset adaptations
read the values for turbine speed, engine speed, battery voltage, all the sensors are working correctly
when I put it into drive or reverse it shows that it engages and it shows an output speed and road speed *but the x5 doesn't move*
-iam leaning towards transfer case
will check if the front shaft tc output is spinning on the splines, than I will check the actuator for the tc
tranny at 155xxxkms and the fluid has been changed twice with no signs of clutch material or metal filings
no dcs, abs, 4x4 lights on
any suggestions?
|
09-03-2014, 08:14 AM
Threaded Mode
