Dynavin N6 install -Pics!

[SMOKEY53]

Originally Posted by Motorsport1207

I agree. I had to epoxy mine in to the holder. I need to do an update some time next summer. Also the camera led for the license plate light triggers the license plate warning light on the cluster.

Yeah I basically had to cut it down with a dremel until it resembled a flat base with a camera sticking out of it, then trim the borders so it would sit flush in the light housing, fill with Sikaflex and tape it all together and allow to dry overnight.

I turned my license plate bulb check off but it still throws the code....annoying.

[TerminatorX5]

Originally Posted by SMOKEY53

Yeah I basically had to cut it down with a dremel until it resembled a flat base with a camera sticking out of it, then trim the borders so it would sit flush in the light housing, fill with Sikaflex and tape it all together and allow to dry overnight.

I turned my license plate bulb check off but it still throws the code....annoying.

there is another line in coding, to REPORT the code to the cluster. turn that line off too...

[SMOKEY53]

Originally Posted by TerminatorX5

there is another line in coding, to REPORT the code to the cluster. turn that line off too...

Thanks mate, will get onto it. Got a feeling this is not going to be a quick install.....