Need help- reconfiguring factory air ride

[itscoo2pyopants]

Originally Posted by RIDIN DIRTY

I'm going to have to go a different route, 1-1.25" is not enough for wat I'm looking for. Here's a pic of my x5 that I photoshopped and the look I'm trying to achieve.




Sent from my iPhone using Tapatalk

That blue looks so good

[Rockit]

I have an 02 4.4 with front and rear air bags. I don't have any ride height buttons stock. If I buy the lowering switch would it work with my car?

If so can someone send me the link that will work with my car please.

Thanks guys.

[Ricky Bobby]

Rockit did you run your VIN through a decoder? If you have EHCII as an option on your car you should have the ride level switch next to the headlight switch.

[Rockit]

I don't have any ride height switch next to the head light. I know I have rear air bags and a compressor...I'm 75% sure the front has air bags as well, I will look again.

Were do I look up the vin?

[Ricky Bobby]

I'll save you the trip to the website. Take a picture of your strut between the top of tire and vin and show me.

[fizzx]

Originally Posted by 4.8isX5

I basically rode at the height you photoshopped for a good while, till i moved to long island and with the roads and jerking around i raised it up a lil...

To get the rears as you have them photoshopped will not happen unless you get a camber kit which im not even sure at that height will even it out, and much larger spacers then 30mm.

Heres mine at that with 25/30 spacer setup

In this pic did you plasti-dip your OEM wheels or have them painted black?

I ordered that software and cable from the Romania dude...should arrive next week :-)