how can a novice repair this

[misteriley]

That's what I was thinking...but I'm sure I've changed them all..and like I say its odd as its only the rear drivers indicator that's not working , I've swapped it with the passenger side which I know works but..no joy??

[bcredliner]

By driver's indicator do you mean side marker?

[misteriley]

Yes sorry indicator in the UK )

[bcredliner]

Turn on your lights and check to see if the front blinker, the indicator and the rear taillight are all illuminated on that side.

[misteriley]

The front works so does the side ..just not the rear??

[bcredliner]

The rear bulb or socket is bad, could be corrosion. That is what is causing the side marker to blink faster. The front turn signal light should also be blinking faster.

[misteriley]

Cheers I shall reinvestigate tommorow and post back.)

[crystalworks]

Originally Posted by bcredliner

The rear bulb or socket is bad, could be corrosion. That is what is causing the side marker to blink faster. The front turn signal light should also be blinking faster.

This is most likely the case. Look at the contact where the rear indicator bulb goes in the housing. If you see a hole burned into it... you can either replace the housing... or learn to solder (for another reason)

Many have repaired that by soldering the hole back closed so the bulb makes good contact again. Not the easiest soldering job as good prep is needed. But not hard either.

[misteriley]

Update...

Now getting dash message
Check brake light
Check reverse light

Even though these two work fine???

[bcredliner]

Do you have brake stoplights or rear blinker light?