Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #21  
Old 02-12-2015, 01:24 PM
Member
 
Join Date: Sep 2011
Location: Calgary
Posts: 747
Doru is on a distinguished road
The mounting points of both those might match. But one is for the 4.6, the other for a 3l engine. You have the 04' 4.4 - the oil cut-off might not be right one. Plus, the 04' model has another cut-off for the oil filter, which is also under the car, as opposed to the pre 04' v8 which have the oil filter in the engine bay.
The bolts for the stiffening plate are torque to yield and zinc coated. Not sure what the relative strength spec is for them (9.8 10.9 12.9?) and this is important, because if you use a Home Depot bolt with a lower strength, and you apply the recommended torque, you might twist them off, or even worse, have them mounted, but they can fail whenever you need the car the most.
__________________
Stable: e92is, e46 M54B25, e83 N52, e53 N62 - sold, e39 M54B30 R.I.P.
Reply With Quote

Sponsored Links

  #22  
Old 02-12-2015, 02:45 PM
Jungerishere's Avatar
Member
 
Join Date: Dec 2013
Location: Chicago
Posts: 381
Jungerishere is on a distinguished road
Neither are correct. 2004-2006 V8 (N62 engine) has oil filter housing on the bottom. You need the one pictured below. Center opening is larger and centered (where the oil filter housing is located).



Quote:
Originally Posted by tcoop View Post
__________________
2004 X5 4.4i
2001 E46 M3
1995 E34 525i
2008 Acura MDX
1984 Maserati
2011 997 Turbo
Reply With Quote
  #23  
Old 02-12-2015, 02:45 PM
Member
 
Join Date: Jan 2015
Location: South Weber, UT
Posts: 17
tcoop is on a distinguished road
For only a $1 more for each bolt it is probably a better idea to get them from the dealer. Thanks for the replies.
__________________
2004 X5 4.4i

Other rides
1988 F250 4X4 460ci
1968 Mustang Coupe
1982 XJ1100
1983 XVZ1200 Venture
Reply With Quote
  #24  
Old 02-12-2015, 04:25 PM
Member
 
Join Date: Jun 2013
Location: Virigina, USA
Posts: 2,574
StephenVA is on a distinguished road
Quote:
Originally Posted by tcoop View Post
I have the 4.4 V8.

Thanks guys I appreciate all your help. I would have never known that it was missing if not for this forum.
31106761790 REINFORCEMENT PLATE 6.70# $183.40
31101096987 HEX BOLT WITH WASHER - M10X55 6-QTY $4.79
33306760587 HEX NUT WITH FLANGE - M10-10 ZNS3 6-QTY $1.46

Note: These bolts are TORQUE to Yield bolts. Which means you torque them down to spec, then crank them another 90 degrees. When you look at these $29 worth of bolts and nuts you will see they are not normal. The nuts have a oval opening that crushes when torqued correctly. They are a ONE TIME use bolt.

Can you use a grade 8 bolts from some other source? Sure. What will be the long term out come? Who knows. That is what engineering is for. If you choose to go down the cheap/alternative path, then you as the consumer accept the out comes. Only a knuckle headed PO or low information tech would leave off the plate and mounting bolts as they hold the sway bar mounting points to the sub frame. Not a good plan. Somewhere there is a plate and a set of biggie bolts laying in a shop. Did the vehicle in question come with any maintenance history? Good starting point in looking for the free/original plate.

There is one listed on Ebay for $80 with the right holes and part number (correct image too!)
__________________

2005 X5 4.8IS
The Blue ones are always FASTER....

Current Garage:
2005 X5 4.8is
2002 M5 TiSilver
2003 525iT
1998 528i
Former Garage Stable Highlights
2004 325XiT Sport
1973 De Tomaso Pantera, L Model
1970 Dodge Challenger T/A 4 sp Alpine White
1970 Dodge Challenger T/A 4 sp GoManGo Green
1971 Dart Sport, “Dart Light” package
1969 Road Runner 383
1968 Ply Barracuda 340S FB Sea-foam Green

Last edited by StephenVA; 02-12-2015 at 04:50 PM.
Reply With Quote
  #25  
Old 02-12-2015, 06:14 PM
Riggodeaux's Avatar
Member
 
Join Date: Oct 2013
Location: Atlanta, GA
Posts: 862
Riggodeaux is on a distinguished road
Smokey, I must say, you take might fine car porn pix. That of the cover plate looking up at the plate is a work of art. Don't tell me that's taken with a smartphone ......
__________________
2006 X5 3.0 6-spd w/Evo UUC ssk
sport/premium pkgs
born Valentine's Day, 2006.
Reply With Quote
  #26  
Old 02-13-2015, 05:58 PM
SMOKEY53's Avatar
Member
 
Join Date: May 2014
Location: Melbourne, Australia
Posts: 539
SMOKEY53 is on a distinguished road
No idea, I did a Google images search. Found two pics. Posted for OP. Just trying to be constructive and helpful I guess.....


Sent from my iPhone using Tapatalk
__________________
2005 3.0d Sport - Sapphire Black
Engine : Bluefin Superchip Tune,
Wheels & Sus: Style 168s (10.5s all round), H&R RDA Spacers, Bilstein B12, Eibach 40mm drop, Whiteline RSB
Exterior: Le Mans flares, 4.6is kit F&R
Interior: Dynavin N6, Blackvue DR650 dash cams

My Build Thread: http://www.xoutpost.com/bmw-sav-foru...run-sheet.html
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 04:22 AM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.