My 100k warranty is ending next month, what kind of work can I get done?

[ard]

It all depends on your relationship with your SA. if, over the last 49,999 (or 99,999) miles you cultivated one, it can pay off. if you are the kind of person that never connected, viewed SAs as interchangeable functionaries, dont be surprised when they treat you as an interchangeable customer...

[Van131]

Originally Posted by ard

It all depends on your relationship with your SA. if, over the last 49,999 (or 99,999) miles you cultivated one, it can pay off. if you are the kind of person that never connected, viewed SAs as interchangeable functionaries, dont be surprised when they treat you as an interchangeable customer...

I gave him a great review at the dealer, so we're cool lol

[Pierce330]

Did you service your X at the dealership?

Story about relationship building: My brother is a tech for VW and works for one of the busiest dealerships in the GTA (Greater Toronto Area) and he just recently had a customer bring in a 2013 Touareg TDI with 150km...out of warranty and in need of a new seat because the element could not turn off and eventually punctured the leather...Since the owner was a loyal customer, the dealership "good-willed" the labour and the seat (cannot replace just the element, whole seat has to go)...

Ard is totally correct, if you paid no attention to form a relationship with your SA than you may regret it, even if you did give him 2 thumbs up on the internet...

Just my 2 cents

[BGM]

Originally Posted by Van131

What were the things they checked for? I sa is cool but I don't think he's as cool as yours was.

This was my thread about it:

1) Upper Oil Pan Leak (engine has to be lowered) - 14 hours labor - est cost $4K
2) Crank Case Coolant Pipe Leak - 45 hours labor (I think I wrote this down right) - est cost $7K
3) A/C System - New Evaporator (pressure check; tech checked temp in center vents at 60 degrees--driver vent blowing 60 but passenger vent was 78) - 17 hours labor - $4K cost

[Pierce330]

Originally Posted by BGM

This was my thread about it:

1) Upper Oil Pan Leak (engine has to be lowered) - 14 hours labor - est cost $4K
2) Crank Case Coolant Pipe Leak - 45 hours labor (I think I wrote this down right) - est cost $7K
3) A/C System - New Evaporator (pressure check; tech checked temp in center vents at 60 degrees--driver vent blowing 60 but passenger vent was 78) - 17 hours labor - $4K cost

Good thing your SA was willing to help you...wow...I can't believe that the crank case coolant pipe is so labour intensive...

[lanbrown]

Yeah, the evap seems to fail, mine is being replaced as I type this. Which is why in post 4 I suggested he makes sure the A/C system is working properly.

[Pierce330]

Funny thing, I had a test drive for a 4.8 scheduled before I bought my Treg and when I turned it on, coolant pissed out everywhere. Got a phone call a few days later from the dealership and they said that they will be wholesaling the X as the coolant exchange pipe blew...after that occurred and after reading posts on here, I steered clear from the 4.8...which was still difficult for me to do...that's how I ended up in a 4.2 Treg...

[bawareca]

Originally Posted by Pierce330

Good thing your SA was willing to help you...wow...I can't believe that the crank case coolant pipe is so labour intensive...

That is the worst problem (nightmare) of N62 engine. Fortunately there is a company in San Diego that manufactures a smart-a$$ pipe that lowers the cost from ~$7k to ~$2k.
The Bimmer Pipe

[BGM]

Originally Posted by Pierce330

Good thing your SA was willing to help you...wow...I can't believe that the crank case coolant pipe is so labour intensive...

I believe on that one they had to lower the engine to get to it if I remember correctly.

[bawareca]

Originally Posted by BGM

I believe on that one they had to lower the engine to get to it if I remember correctly.

The heads and the front timing covers must be removed to replace that pipe. Same as replacing the timing chain