|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#21
|
|||
|
|||
Quote:
What does coding entail? I have a cable and did some coding on my E70 before. Is the CIC coding diy-able?
__________________
Black Sapphire MetallicNevada BrownDark Bamboo e70 X5 xDrive4.8 Alpine WhiteCoral RedAluminum f30 328i Sportline/6MT Imola RedBlackBlack Aluminum e46 330i ZHP/6MT |
Sponsored Links | |
|
#22
|
|||
|
|||
Hi Guys new to this forum,
have tried searching and been found small pieces of info, a lot of which is for differnet models of vehicle and most is from cic to nbt not ccc to nbt have an '09 E70 X5 with CCC, have purchased the NBT Retrofit kit from customretrofit.ro kit come with no installation instructions have tried searching and been found small pieces of info, a lot of which is for differnet models of vehicle and most is from cic to nbt not ccc to nbt kit included - NBT kit (headunit + 8.8’’ monitor + touch idrive + video cable) - NBT Exx retrofit adapter emulator - PnP Wiring kit - Touch ECU I also purchased - CIC Trim for Controller - CIC Dash Trim for head Unit - CIC Control faceplate - USB cable and USB Socket for Armrest - Bluetooth Antenna - MOST Loop Terminator Can anyone help me with what wiring I need to be doing to install this, removing dash trims and all I should have no problem with, i have seen some people talking about modifying obd2 wiring with Ethernet connections or something, but the info wasn't very clear would like to try and tackle this job myself as don't know anybody in Northern Ireland that does this type of install any and all help guys would be very much appreciated thanks |
#23
|
||||
|
||||
Hi Dangs,
Welcome to the forum... Don't know if you found it, but here is a very extensive thread that goes into a bunch of detail for the CCC to NBT journey... https://xoutpost.com/bmw-sav-forums/...t-journey.html This video is also VERY useful: https://www.youtube.com/watch?v=J55Tc3SdY_8 I didn't need to do any re-wiring of the OBD port. The folks at Bimmer Retrofit were awesome in helping me also! Hope this helps, John
__________________
2008 4.8i X5 (2/25/08) 105k: Titanium Silver/Black; All -HUD; Aero Kit; 22" VS-130 w/Pirellis; ///M Shifter & Fr Brakes; Gauge Rings; Console Pads; Custom Wheel & Mats; Roof Rails Carbon Fiber: Int Trim, Nav Surround, Grill, Cluster Trim, Shifter & Eyelids 1.2" H&R; LUX AEs; LCI Tails; Rear Fogs; NBT EVO; ESS Tune; Meisterchaft GTC Exhaust Last edited by 95wildtt; 09-11-2017 at 06:38 PM. |
#24
|
|||
|
|||
This is the kit I have, Just wondering if screen needs disassembled to fit in place of old CCC display |
#25
|
||||
|
||||
At first glance, I'm pretty sure you will have to modify the screen as the mounting points and bezel don't look like they will line up in the E70.
__________________
'01 740i Sport MKIV, Quad Brake Lights, Bi-Xenon retrofit, HID Fogs Dinan 7 Struts, Springs, camber plates, Intake, MAF, CAI, Throttle Body, NBT Retrofit, Strong Strut '99 318ti Titanium Silver; '97 318ti Boston Green; '13 X5 3.5i Saphire Black Metallic '84 633csi Black (sold); '88 325iC Black (sold); '97 740iL Black(sold); '01 740iS Black (sold);'97 318ti White (sold); '08 X5 4.8i Titanium Silver (sold); '96 318ti Alaska Blue (sold) |
#26
|
||||
|
||||
You don't need to modify the screen, but will need to design a custom bracket to hold the display.
There are lots of photos, and a few threads out there, for what others have done to make the display work with the E70 dash opening. Here is a link to a couple of photos at the bottom of the page: Installation BMW NBT Exx retrofit adapter on BMW E70 - BMW NBT Exx retrofit adapter Installations - Installations - Articles - CarSystems.com.ua I've attached a photo of my install too, FYI. You have to be a bit creative, but it looks awesome when completed. Cheers, John
__________________
2008 4.8i X5 (2/25/08) 105k: Titanium Silver/Black; All -HUD; Aero Kit; 22" VS-130 w/Pirellis; ///M Shifter & Fr Brakes; Gauge Rings; Console Pads; Custom Wheel & Mats; Roof Rails Carbon Fiber: Int Trim, Nav Surround, Grill, Cluster Trim, Shifter & Eyelids 1.2" H&R; LUX AEs; LCI Tails; Rear Fogs; NBT EVO; ESS Tune; Meisterchaft GTC Exhaust |
#27
|
||||
|
||||
My bad, didn't look like my 10.2 so follow what John shows here.
Hey John - you happen to have some pics of the back and how you filled the hole? Also if you could advise on the mounting bracketry? Still have to get my EVO installed and the mounting of the 10.2 screen is what has been holding me up on the process. Thanks
__________________
'01 740i Sport MKIV, Quad Brake Lights, Bi-Xenon retrofit, HID Fogs Dinan 7 Struts, Springs, camber plates, Intake, MAF, CAI, Throttle Body, NBT Retrofit, Strong Strut '99 318ti Titanium Silver; '97 318ti Boston Green; '13 X5 3.5i Saphire Black Metallic '84 633csi Black (sold); '88 325iC Black (sold); '97 740iL Black(sold); '01 740iS Black (sold);'97 318ti White (sold); '08 X5 4.8i Titanium Silver (sold); '96 318ti Alaska Blue (sold) |
#28
|
||||
|
||||
Hi,
Sorry I didn't take any photos of the bracket or cover that I made for the display. But basically it attaches at the hard-points where the screws for the old display were and also to the mounting points on the new display. It took a good amount of work to make it, and lots of time... I made a cover for the hole with a thin sheet of aluminum, bent it and then covered it with the outside cover from an old glovebox that I bought off eBay so it would match the dash on either side. Here are a couple of photos of what others have done to fill the hole in the dash... Thanks, John
__________________
2008 4.8i X5 (2/25/08) 105k: Titanium Silver/Black; All -HUD; Aero Kit; 22" VS-130 w/Pirellis; ///M Shifter & Fr Brakes; Gauge Rings; Console Pads; Custom Wheel & Mats; Roof Rails Carbon Fiber: Int Trim, Nav Surround, Grill, Cluster Trim, Shifter & Eyelids 1.2" H&R; LUX AEs; LCI Tails; Rear Fogs; NBT EVO; ESS Tune; Meisterchaft GTC Exhaust Last edited by 95wildtt; 09-12-2017 at 04:00 PM. |
#29
|
|||
|
|||
Has anyone ever put an F30 screen on e70 CCC casing?
|
#30
|
||||
|
||||
I think this is what you are asking about...?
https://xoutpost.com/bmw-sav-forums/...journey-6.html Cheers, John
__________________
2008 4.8i X5 (2/25/08) 105k: Titanium Silver/Black; All -HUD; Aero Kit; 22" VS-130 w/Pirellis; ///M Shifter & Fr Brakes; Gauge Rings; Console Pads; Custom Wheel & Mats; Roof Rails Carbon Fiber: Int Trim, Nav Surround, Grill, Cluster Trim, Shifter & Eyelids 1.2" H&R; LUX AEs; LCI Tails; Rear Fogs; NBT EVO; ESS Tune; Meisterchaft GTC Exhaust |
Bookmarks |
Tags |
ccc, cic, nbt, upgrade stereo |
Thread Tools | |
Display Modes | |
|
|
|