|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Can you tell me how do I find out where the fuse would be at or at least a number because I look and can't find it Sent from my iPhone using Tapatalk |
|
#2
|
|||
|
|||
|
I had the same issue when I changed the LEDs from regular bulbs.
All you need to do is open the fuse box under the glove box deep down , you need to open the three screws and later open a green screw to access the fuse box. The right fuse is on the right hand side 2 or 3 from the back . its a 10 amp fuse . replace it and then before putting the LED . check all works again. Then insulate the bulb holder with a electric tape so that it does not touch the body., then replace the bulb to LED and check again. Now you are done. Thanks |
|
#3
|
|||
|
|||
|
Quote:
![]() So what would the fuse number be because I looked and I wana double check too. also I took it off and it looks like this now so inside the glove box is empty just the connecting wire. Sent from my iPhone using Tapatalk |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|