Ok guys, here is the bundle I got off of ebay (as you can see I accidentally got the F10 screen)
Since I got the 10.2 screen I decided to go with this size instead of the 8.8 screen, so I purchased an F15 screen on eBay for $38. I purchased it AS-IS as seller stated it was from a front end collision vehicle and couldn't test the unit. I plan on using the F10 screen and just use the F15 bezel in a worse case scenario.
Here is the adapter I got off of BimmerRetrofit including the updated rear camera
Decided to install the controller onto the trim since I was limited to staying indoors for a while. I decided to play it safe and cut evenly as shown in the next picture.
Then I kept trimming away until I achieved my goal and it aligned perfectly in the socket. It took a a while but I am pleased with the end result. After it was a perfect fit I just applied epoxy to the to the center of each side and let it sit over night. The end result looked like it came like this from the factory
03-11-2017, 02:32 PM
Threaded Mode
