|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#3
03-14-2017, 04:32 PM
|
||||
|
||||
|
"AWD Error 4x4 issue" on the dash doesn't necessarily mean your AWD isn't working. It could be as simple as a faulty sensor or something minor. Your AWD is likely still functioning.
Dropping the screwdriver on the alternator just completed the circuit which caused the spark. I would be surprised if that had anything to do with your AWD issue. But may be related to the other code??  I would be surprised if towing is related to either of these. Find your trunk fuse box diagram and spend a minute going one-by-one ensuring the fuses are the right amperage and in the right location. That will rule out a fuse mix-up. As far as the error codes... Code: 53FC- (21500)- KL30 Voltage supply https://xoutpost.com/bmw-sav-forums/...ht-dash-4.html & Code: 54C6 Oil wear transfer case - 54C6 oil wear how to reset - Bimmerfest - BMW Forums The oil wear code simply signals you need new fluid in your transfer case. This is the likely cause of your "AWD 4x4 warning". The "53FC voltage supply" you may have to do more research on to figure out.. I would replace your fluid and clear the codes. See if the Voltage code comes back. Hopefully this helps. Good luck!
__________________
2007 E70 X5 4.8i Sport Package 8x,xxx Miles "My Precious" (Smeagol voice) 
Last edited by BustedKnuckles; 03-14-2017 at 05:00 PM. 
|
| Bookmarks |
|
|
|
|
Threaded Mode
