|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Misfire?
By the way I serviced the trans 3 months ago because the oil pan filter housing was leaking so we replaced it and changed the oil there was no metal shavings or anything car drove amazing after that. I have not done the spark plugs or have any previous history of it being done ![]() ![]() ![]() upload facebook pictures |
| Sponsored Links | |
|
|
|
|
#2
|
|||
|
|||
|
When receiving a flurry of errors like that from, its most certainly some electrical issue. I would first investigate your battery, then alternator.
|
|
#3
|
|||
|
|||
|
Thanks for taking your time to look at my thread last night I changed the coil pack on #2 and i cleared the faults and took it out for a drive, it didn't seem to sputter anymore as far as the battery it's been changed about 6 months ago can the alternator still be a failure without draining the entire battery?
|
|
#4
|
|||
|
|||
|
If its an electrical problem, I'd say "anything is possible"
I have seen threads on here where it seems like the alternator never "turns on" on some engine starts. I vaguely remember someone mentioning some product they leave in the OBD2 port that will alert them if the battery is not charging while the engine is running. I mean... you've got like a dozen errors there that should be totally unrelated to a misfire. |
|
#5
|
|||
|
|||
|
This is the thread i was thinking of: https://xoutpost.com/bmw-sav-forums/...tem-issue.html
I would attempt to monitor your voltage and check if its high/low if this occurs again. Of course, I could be totally throwing you off. I don't think I have seen the car just shift to neutral like that. Good luck. |
|
#6
|
|||
|
|||
|
before this incident did you have a clean bill of health on rheingold?
Id suggest clearing the codes in Rheingold to see which are permanent codes and wich are just one offs that have been there for a while. Also track how often they come on. edit: just read u did clear the codes Last edited by Stockx5; 08-16-2017 at 01:59 PM. |
|
#7
|
|||
|
|||
|
Hey guys so I had the cylinder 2 misfire when I made this thread ,I swapped out the coil pack and things where normal . Now again misfire same code same cylinder 2 same symptoms. I noticed when this happens my passenger window rolls down halfway anyways if anyone has any ideas or tips let me know thanks
|
|
#8
|
|||
|
|||
|
Have you checked your voltage? It does really seem like your electrical system has gone rogue.
|
![]() |
| Bookmarks |
|
|
|
|