|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#5
|
|||
|
|||
|
I just got it working. Now it says FLAT TIRE MONITOR in CIC!
On pre 10/10 build date e70, unplug the RDC module which is under the drivers dash: Follow these directions to get to it... when you unplug and remove it, it will say RDC on it. https://www.newtis.info/tisv2/a/en/e...s-rims/P0UXnh4 On 10/10 and newer build date e70, unplug the RDC module which is located on a frame rail near the muffler: See this link for photos: https://xoutpost.com/1121861-post40.html Or you can see in newtis: https://www.newtis.info/tisv2/a/en/e...-rims/FCVcPPJi Remove VO $2VB from CAS and FRM (not sure if necessary but did it anyway). Things to change in coding modules: Quote:
After you do your typical key out, wait a bit, key in start engine. Go into idrive and see the Flat Tire Monitor, you can reset there. That's it! |
| Bookmarks |
|
|
|
|