Engine bay part identification

[golf4dj]

Originally Posted by ten13th

Long time member, but first post.

Saw this thread came across my TapaTalk feed. I thought to myself, that’s an interesting part to break. LOL, when opened my hood just now the centerpiece is completely gone and the two side pieces are held in place by the gasket. I guess I’ll be joining the replacement club.


2010 X5 35d

Pretty cheap aftermarkets on eBay. Replaced mine as well.

Sent from my Nexus 6 using Tapatalk

[goong522]

Originally Posted by mikey777

Does anyone know what part(s) this is in the engine bay (not the rubber gasket but the parts under it that the rubber is attached to)? It seems to function to separate the engine compartment from the air filter section on the left and not sure what on the right and the windshield cowl. Mine broke off and while the rubber is holding the pieces together, sometimes it rattles. Thanks.

Did you end up replacing? If so can i ask what part numbers your ordered?

[CLS70]

You can use realoem https://www.realoem.com/ to find the part numbers....

[gson]

I recently replaced a cracked partition wall on a 2012 X5. Turner Motorsports sells a kit that includes all three pieces (all three were cracked):

https://www.turnermotorsport.com/p-5...eplacement-kit

When I replaced the partition walls I also found that the plastic pieces that connect the partition wall to the body were cracked and ordered the following parts to replace them:

https://www.turnermotorsport.com/p-1...nuine-bmw-part
https://www.turnermotorsport.com/p-1...nuine-bmw-part

Replacing the partition wall was easy. Good luck!

[ard]

Damn. I remember when OE parts were like $60 each....