Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E70) Forum
Bimmer Tool Rental
User Name
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management

LinkBack Thread Tools Display Modes
Old 05-17-2018, 10:09 AM
Join Date: Dec 2010
Location: Alexandria, VA
Posts: 8
marcesq is on a distinguished road
2011 X5 35D P0112 Fault Code

I had SEL and a P0112 Fault Code - my own Google research wasn't very helpful in analyzing the probably defective part so I brought the vehicle to an independent shop. They quoted replacing the MAF (at an absurd price).

I was able to find the MAF from ecs tuning for less than $30, and replaced it in about 15 minutes - not sure why it was going to cost $250 in labor for the shop to replace it...

Anyways, cleared the code with Torque, and good to go now.

Very easy DIY. I replaced the air filter when the SEL came on and there was no visible debris or damage.
Reply With Quote

Sponsored Links

Old 05-17-2018, 11:28 AM
seattle's Avatar
Join Date: Oct 2011
Location: Seattle
Posts: 494
seattle is on a distinguished road
On FCPEuro, there are 2 of them:
* BMW Mass Air Flow Sensor (335d X5) - Bosch 0281006147 - $190
* BMW Mass Air Flow Sensor (335d X5) - Genuine BMW 13628509725 - $26

What's the difference? I can't tell you.

More on that code from Rheingold/ISTA-D

Fault description
The fault is recognised if the sensor signal of the intake air temperature exceeds a limit value.

Limit value: between 129.96 C and 144.96 C (version-dependent).

Condition for fault identification
Monitoring is only performed when no fault with the sensor supply voltage is set.

Control unit voltage: 9.5 V to 16 V.

Condition for fault memory entry
The fault is entered if it is present for longer than the following period (debounce time): 1000 ms

Action in service
1. Check line and plug connections
2. If wires and plug connections are OK:

Replace mass air flow sensor.

Fault effect and breakdown warning None

Driver information Malfunction indicator lamp

Service instruction
If the hot film air mass meter is replaced, the following service function must be carried out: Delete adaptations, air mass system.
Reply With Quote
Old 05-17-2018, 01:00 PM
Join Date: Dec 2010
Location: Alexandria, VA
Posts: 8
marcesq is on a distinguished road
Thanks, Seattle - I didn't perform the "delete adaptations, air mass system" service functions, so let's hope that doesn't haunt me later

I can tell you that the OEM BMW part from ECS was labeled with all of the BMW and Bosch identifiers one would expect to see. The metal grating medium/film appeared a bit different (more robust) from the one I removed, but that just may be 70k+ miles of use.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 01:34 AM.
vBulletin, Copyright 2019, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.