Alignment

[isarkisov]

Originally Posted by pshovest

Your outside wear problem was most likely due to the excessive .09" toe-in and the low inflation pressure. Check the tire sidewall for the max allowed inflation pressure. Then pump the front tires to 40 psi. This is what I run and it will reduce the edge wear. If tires don't have an "outside" marking, dismount and remount with worn edge inside.

Just checked my tires, looks like 40 PSI is the max pressure and there is "outside" marking.


Don't you think 40 PSI in front would be too much causing very harsh ride and hard on suspension?