|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#29
|
||||
|
||||
|
Failed solenoids (if lucky, dirty solenoids) is a very common problem with the N52. A faulty valvetronic is much less likely. I recently bought an e61 with the n52 that had been seriously neglected and had 180000 miles on it. Lots of sludge under the valve cover, stumbled/missed on idle slightly but not enough to throw a code. I cleaned the solenoids, changed the plugs, all coils (one was mis-matched), valve cover gasket, and flushed the engine twice with SeaFoam. Been a great daily ever since with no unusual idle, great throttle tip in, etc. Point being I don't think your issue with the code/stumbling is an oil problem. You could clean the solenoids for S's and G's, it's an easy 20 minute affair involving only a couple of 10mm bolts and a couple harnesses.
But I think you're going to have to find someone with a BMW specific code reader. I think it would speed things up tremendously. I find when working on BMW's... P codes are not very helpful in many cases. And stored codes (not active codes the ECU retains) can be equally valuable to a diagnosis.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles) 2006 X5 4.8is Build 11/05 Maintenance/Build Log Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles) 2010 X5 35d Build 02/10 Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles) |
| Bookmarks |
|
|
|
|