3.0 Motor Mount help

[Sundevil]

I actually read that post, but it is regarding the V8 and I am looking for the I6.

I found this site, but it is for the E90 AWD with N52.

https://www.rmeuropean.com/bmw-e90-e...placement.aspx

This is what I am thinking of trying, but was curious if there is anything different when it comes to the X5.

[smassey321]

Originally Posted by Sundevil

I actually read that post, but it is regarding the V8 and I am looking for the I6.

I found this site, but it is for the E90 AWD with N52.

https://www.rmeuropean.com/bmw-e90-e...placement.aspx

This is what I am thinking of trying, but was curious if there is anything different when it comes to the X5.

This should get you most of the way there. When I dropped the sub-fame on my E90 I used an engine support bar. https://www.harborfreight.com/1000-l...bar-96524.html

The biggest difference between the E90 and the E70 is the all wheel drive system. It is going to get in the way. If you do the job, change your oil pan gasket while the sub-frame is out of the way.

[Baby Unicorn Taco]

Originally Posted by Sundevil

I actually read that post, but it is regarding the V8 and I am looking for the I6.

I found this site, but it is for the E90 AWD with N52.

https://www.rmeuropean.com/bmw-e90-e...placement.aspx

This is what I am thinking of trying, but was curious if there is anything different when it comes to the X5.

You can always post on the E70 owner Facebook page. You will get responses. Might find someone who did it.


Sent from my iPhone using Xoutpost.com