Cup Holder Door Snapped In Half

[SeanC]

I replaced those two sliding covers with the help of a friend. It is not for the faint of heart, but certainly doable. My X5 does have 4-zone climate control as well as DVD for the rear entertainment, which made the process even more difficult.

Note that the entire center console needs to come out. I thought about a workaround but couldn't find any.

We followed the steps at newtis.info to remove the center console. Good luck!

[Toothbrush]

Originally Posted by SeanC

I replaced those two sliding covers with the help of a friend. It is not for the faint of heart, but certainly doable. My X5 does have 4-zone climate control as well as DVD for the rear entertainment, which made the process even more difficult.

Note that the entire center console needs to come out. I thought about a workaround but couldn't find any.

We followed the steps at newtis.info to remove the center console. Good luck!

I've considered doing this off and on over the years but keep telling myself not to do it... is there anything else that you have access to during the process that would make it more worthwhile?

It was only after I purchased my X and looking at interior pics online that I realized the cup holder area was supposed to have those sliding doors. I was like "oh, that's what those plastic bits I found were..."

[SeanC]

Originally Posted by Toothbrush

is there anything else that you have access to during the process that would make it more worthwhile?

Not really unless you have some trim issues, e.g. peeling off, etc, in which case you might want to replace those as well. It's one of those BMW jobs where the part costs next to nothing but the labor makes it $1000+ job.

[LightlyToasted]

I recently repaired the sliding tambour cover over my ashtray. This required removing the entire center console, which is a relatively massive job. I followed the steps in the TIS. If it breaks again I'm going to leave it open rather than do that job again.

[ard]

Originally Posted by LightlyToasted

I recently repaired the sliding tambour cover over my ashtray. This required removing the entire center console, which is a relatively massive job. I followed the steps in the TIS. If it breaks again I'm going to leave it open rather than do that job again.

The elastic on my cupholders broke a few years ago....


has not fixed itself yet.