|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
04-08-2023, 08:23 PM
|
|||
|
|||
|
2013 E70 X5 N55 fuel pump.
I am having bimmerlink give me a code of 2BEE (high press fuel rail). It will start and run poorly. I replaced the rail sensor, as I broke it replacing the valve cover. Once everything got back together, I got the above running issue and code. I have taken the fuel tank pump out. Put a hose and gauge on it and get 125 psi. My confusion is two part. Does this car have another "high Press" pump on the engine and the pump in the tank only pumps it to that one? I am getting conflicting videos and part searches showing a second pump. If not, is 125 psi enough pressure or do I need to replace it? Revised: Figured it out. Last edited by rvaughnp; 04-09-2023 at 09:10 AM. 
|
| Sponsored Links | |
|
|
|
|
#2
04-09-2023, 01:58 PM
|
||||
|
||||
|
The HP fuel rail is fed by a HP fuel pump mounted on the engine. Follow the HP hoses back to source.
https://www.realoem.com/bmw/enUS/par...-X5_35iX&mg=13
__________________
Sent via Telegraph Wires using my Morse Key. 2015 X5 xDrive35i MSport 2013 X5 xDrive35i
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
