Burnt Fuel Pump Wires

[werdn]

Originally Posted by 80stech

Again, the critical part is the connection, if the pump side of the connectors are poor quality and/or oxidized you still might have a problem.

Crimps/soldering needs to be done properly as well.

I am assuming you are talking about the socket that plugs into the pump? The part number that I included in the last post includes the socket. So it is new.

I soldered the wire. I first twisted the stranded wire, then tied it in a Western Union knot. I then put solder over that. After that, I head shrunk the connection.