|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#8
08-28-2023, 10:32 PM
|
|||
|
|||
|
Yep, it was easier to pop the tierod than find the sweet spot trying to steer it. Using a rotor is a great idea; as you know if will fit the hub.
TIS mentions disconnecting the straight control arm, strut fork and the "front axle support"; no idea what that is. I disconnected the sway bar link as the upright is really hard to maneuver with it in place. Maybe that's the "axle support". I thought I could snake a long punch/pry bar to pop the axle out of the diff from underneath. No dice, the aluminum reinforcement pan needs to come off to get a straight shot at it. More tomorrow...
__________________
12 E70 3.5i xDrive 03 E46 330i ZHP 01 E53 3.0i 98 E36 323is 12 Audi A4 Quattro 79 Triumph Spitfire 73 MGB 
|
| Bookmarks |
|
|
|
|
Threaded Mode
